Frequency Meter
Frequency meter for retailers to identify the frequency of the original remote to duplicate.
1
Press the button: the word “SCAN” will be displayed.
2
Place the original remote approximately 15–20 cm away, press and hold the button on the original remote whose frequency you want to identify until the tester display shows the frequency in MHz (e.g., 433.92 or 868.3).
If the word “roLL” appears, the remote transmits a rolling code.
If the tester cannot read the code within 10 seconds, move the remote closer to about 10 cm.
TECHNICAL SPECIFICATIONS
WEIGHT: 68 g
DIMENSIONS: 6 x 8.2 x 2.5 cm
BATTERIES: 2 x 1.5V – AAA (not included)
ADDITIONAL INFORMATION
CODE: FRB001
BARCODE: 8054242081732
TYPE: Frequency meter for retailers to identify the frequency of the original remote to duplicate.
SETUP: Ready to use, just insert batteries.
PACKAGING:
Kit Indoor 433
Indoor Kit 433MHz. Automation of gates, barriers, lighting and irrigation.
- two independently configurable channels with extreme simplicity, monostable mode or bistable
- maximum compatibility with all brands with a frequency of 433.92 MHz
- 2 remote controls with fixed code provided in the box
- Two channels configurable mode monostable or bistable
- Compatible with all fix code 433,92 MHz brands
2 Self-learning remote controls with fixed code provided in the box
Two channels can be configured in monostable or bistable mode
Specification Data
WEIGHT: 170 g
DIMENSIONS: 10,5 x 7 x 3,5 cm
POWER: 12V – 24V
RELAY: 12A – 14Vdc – 7A
BATTERIES: 12 V – 27A
Additional information
CODE: SUPRK001
BARCODE: 8054242080131
TYPE: Indoor Kit for automation.
CONFIGURATION: electric scheme is supplied inside blister. This product must be installed by a skilled technician
MODE: Stable(timed)/Bi-stable
BLISTER CONTENT: Antenna, receiver, 2 RF remote control and instruction manual. Batteries are included.
Downloads
Manual
Datasheet
Kit Garden 433
Receiver kit 2 channels 12A with 2 remote controls 433 MHz suitable for gates, barriers, irrigation and garden lighting
Suitable to replace a defective receiver or to control other devices or to turn on lighting. The receiver can learn 433,92 MHz fix code remote controls. Easy to install it can replace an existing one.
- Two channels with independent configuration: Monostable (timed) or Bi-stable
- Compatible with all fix code 433,92 MHz brands
- 2 self-learning remote controls fixed code provided in the box
- Easy to install, it can replace the existing receiver
- Capacity to learn 140 remote controls
Waterproof box
2 self-learning remote controls with fixed code provided in the box
Two channels can be configured in Monostable(timed)/Bi-stablemode
Specification Data
WEIGHT: 550 g
DIMENSIONS: 12 x 9 x 4 cm
POWER: 12V – 27A
Additional information
CODE: SUPRK004
BARCODE: 8054242080599
TYPE: Radio receiver kit – Outdoor – with 2 radio remote controls. Self learning
CONFIGURATION: Configuration and electric scheme inside blister
MODE: Stable(timed)/Bi-stable
BLISTER CONTENT: Antenna, receiver, 2 RF remote control and instruction manual. Batteries are included
Downloads
Manual
Datasheet
Kit Outdoor 868
Receiver, with remote controls, suitable for every kind of outdoor and indoor requirement.
- Two independently configurable channels, monostable and bistable
- Maximum compatibility with all brands with a frequency of 868 MHz
- Two self-learning remote controls provided in the box
- Waterproof box
Waterproof box
Two self-learning remote controls provided in the box
Two independently configurable channels, monostable and bistable
SPECIFICATION DATA
WEIGHT: 190 g
DIMENSIONS: 10,5 x 7 x 3,5 cm
POWER: 12/24V – AC/DC
ADDITIONAL INFORMATION
CODE: SUPRK003
BARCODE: 8054242080360
TYPE: Outdoor Kit for outdoor automation. 868 Mhz monostable/bistable two channels – fixed frequency for automating gates and barriers
SETUP: Configuration and wiring diagram included in the blister. This product must be installed by a qualified technician
MODALITY: Monostable and Bistable
OUTER BLISTER: Antenna, receiver, 2 radio controls and instructions manual. Batteries included
Downloads
Manual
Datasheet
Kit Outdoor
Receiver, with remote controls, suitable for every kind of outdoor and indoor requirement.
- Two independently configurable channels, monostable and bistable
- Maximum compatibility with all brands with a frequency of 433.92 MHz
- Two self-learning remote controls provided in the box
- Waterproof box
Waterproof box
Self-learning remote controls provided in the box
Two channels: monostable and bistable
Specification data
WEIGHT: 190 g
DIMENSIONS: 10,5 x 7 x 3,5 cm
POWER: 12/24V – AC/DC
Additional information
CODE: SUPRK002
BARCODE: 8054242080148
TYPE: Outdoor Kit for outdoor automation. 433 Mhz monostable/bistable two channels – fixed frequency for automating gates and barriers
SETUP: Configuration and wiring diagram included in the blister. This product must be installed by a qualified technician
MODALITY: Monostable and Bistable
OUTER BLISTER : Antenna, receiver, 2 radio controls and instructions manual. Batteries included
Downloads
Manual
Datasheet